« Back
Davone Studio

These monitors from Davone pack astounding performance in a lovely and compact package, complete with purpose-built stands! RETAIL: $3,700.




the Studio

All the performance and innovative engineering pioneered for the critically acclaimed Solo, and then some. The Studio pairs Davone’s special fibre blend 7” mid woofer with the unique ring radiator tweeter. Together with the high performance cross over, they create a compellingly realistic sound stage out of all proportion to its size. A bespoke floor stand (available separately) will position the Studio at the perfect listening height.

Studio quality drivers

Just like you would expect in a studio monitor, the Studio uses top of the range drivers. The special fibre blend woofer membrane gives exactly the right combination of stiffness and damping – which you’ll hear as exactly the right combination of finesse and control. The large symmetric magnetic motor gives high power handling. With the cabinet offering the optimal impedance for the woofer, the Studio delivers outstanding deep bass performance and a dynamic and detailed midrange.

The ring radiator

Used in both Ray and Tulip, this sweet-toned tweeter is becoming a legend in its own right. Being a 29mm ring radiator tweeter, it offers exceptionally low distortion. Through the optimized dome geometry, and by omitting the typical plug in the centre, sound dispersion is further enhanced. The high power handling combined with a low resonance frequency enables a low cross over frequency, without the tweeter sounding aggressive. Even at higher volumes.

The stand

Laser cut from solid 6 and 8mm steel, welded together into one piece, and with a geometry of an I-beam, the stand is very rigid and heavy. Therefore, by mounting the Studio on the dedicated stand, the sound quality will be improved. Especially the bass range and imaging will become better defined due to the larger distance from the floor and added mass. The stand is 64cm high without spikes, and the baseplate measures 28 x 31 cm.


Frequency response



4 ohm, 3.7 ohm minimum at 200Hz


87 dB/2,83V/m

Max power

80 W (IEC 268-5)

Mid woofer

180mm, low distortion driver with a special fibre blend cone with optimal balance of stiffness, damping and density


29mm ring radiator, dual balanced compression chamber, saturation controlled motor system, non-reflective rear chamber with optimized damping

Cross over

2.3 kHz


Bass reflex


6 layer beech wood form pressed veneer


9.3 kg / piece

Current version

Værløse Studio A (VSA)