« Back
Naim NAP 100 and DAC V1 Power/PreAmp/DAC Combo!

Save an incredible amount on this astounding component combo from Naim Audio!! The NAP 100 will serve your power needs with ultra-smooth high current power the likes of which only Naim can produce: grippy and lush on the low end, while also sparkling and resolute through the whole frequency range. The DAC V1 shall service your input and volume-control needs, with flexibility and capability to handle a wide variety of sources. When purchased together, save OVER 25% OFF the original retail price. RETAIL: $4,090.

$3,049 SALE!

NAP 100:

The NAP 100 is a classic expression of traditional Naim Audio power amplifier engineering. While its dimensions are conveniently compact – just a mere 20cm wide – its performance is seriously dynamic and expansive.

The NAP 100 is perfect for a number of applications, adding a dose of Naim Audio musicality to a wide variety of systems. Paired with our DAC-V1 digital-to-analogue converter, it becomes the power behind a high-end system to unleash the music from your PC or Mac. Add a UnitiServe to the equation and you create a full hi-fi system that divorces your listening experience from the desktop and allows you complete control from our n-Serve iOS app.


50W per channel output into 8 ohms
Dual mono power amplifier design
Audiophile grade hand-selected components
Linear power supply with a large toroidal transformer
Pair with the DAC-V1 and UnitiServe for compact, high-end music system

Technology & Craft

Despite its small size, the NAP 100 packs a serious punch when it comes to sound quality. Delivering 50 watts per channel into 8 Ohms, and 75 watts into 4 Ohms, its dual mono design is based on the circuit topology found in our reference all-in-one player, the SuperUniti.

Our engineers also took inspiration from classic Naim Audio power amplifier design in developing the NAP 100. A large toroidal transformer and hand-matched, hand-wired critical componentry allow it to bring new levels of clarity and vitality to your music.

Audio Inputs Analogue Input

1 x 4-pin DIN, 1 x RCA pair
Input Impedance

Audio Outputs Gain

Frequency Response

-3dB at 3.5Hz - 69kHz
Minimum Load Impedance

Speaker Outputs Speaker Outputs

L & R, 4mm “banana” sockets
Speaker Outputs

50W per channel into 8Ω, 75W per channel into 4Ω
Power Mains Supply

115V or 230V, 50 or 60Hz
Power Consumption (quiescent)

Power Consumption

Physical Dimensions (HxWxD)

87 x 207 x 314 mm

5.1 kg
Shipping Dimensions

210 x 280 x 410 mm
Shipping Weight

7.6 kg
Supplied with

SNAIC, Power-Line Lite mains cable (UK denominations only)
Finish Front Black powder coated
Case Black powder coated


Our newest DAC is perfectly optimized for modern digital listening. It features an asynchronous USB input – ideal for getting stunning sound quality from your computer. DAC-V1’s single-ended class-A headphone amplifier affords it added versatility. The output stages of this amplifier are kept as pure as possible, ensuring outstanding sound quality for headphone listening. The DAC-V1 is now DSD compatible and able to play 64 (2.8MHz sample rate) and 128 files (5.6MHz sample rate); the upgrade required significant optimisation of the core DSP code which has also improved sound quality.

The DAC-V1’s compact size makes it perfectly suited as a desktop companion to your Mac or PC, but its exceptional musicality means it will complement our standard-width hi-fi components just as well. Combine it with our UnitiServe hard disk music server and its matching NAP 100 power amplifier and you’ll create a stunning hi-fi system from just three compact boxes.


High-speed asynchronous USB input up to 24bit/384kHz
Five S/PDIF inputs for digital sources like games consoles, set top boxes and hard disk servers
Selectable fixed or variable analogue outputs (DIN or RCA)
Naim Audio digitally controlled analogue volume control for performance and precision 40bit SHARC DSP chip handling filtering and oversampling
Single-ended class-A headphone amplifier output

Technology & Craft

Asynchronous USB Explained

Digital audio isn’t just about the data – 0s and 1s – and ensuring that each sample value is accurately converted into a corresponding output voltage. Also vital to achieving the highest fidelity is ensuring that each successive sample is reproduced at a precise time interval from those around it. If that time interval varies – an effect known as jitter – then the output waveform will be distorted. To prevent this, the master clock that controls the process should, ideally, be placed right next to the digital to analogue converter circuitry, not remote from it. Asynchronous mode USB provides for this because it allows data to be ‘pulled’ from the source as required, whereas in other modes the data is ‘pushed’ down the interface under control of the far inferior and distant clock in the computer.

World class headphone amplifier

The single-ended Class-A headphone amplifier of the DAC-V1 cleverly uses the pre-amp output amplifier for headphone drive. The moment headphones are plugged in, the output current drive is automatically turned up five times to give dynamic drive for all headphone impedances. The amplifier runs from a high voltage power supply so has the ability to drive high impedance headphones with the voltage swing they require for open and dynamic sound. The result is the audio stages are kept as simple and pure as possible for both normal and headphone modes.

Audio Inputs Digital

5 x S/PDIF:
- 1 x coaxial BNC
- 2 x coaxial RCA
- 2 x optical TOSLINK

1 x asynchronous USB (type B socket)
Audio Outputs Analogue

2 (RCA and DIN) Variable Pre-amp Output, Line Output Fixed: 2.1V RMS
Output Impedance

Line Output

Variable or 2.1V RMS fixed
Load Impedance

10kΩ (min)
Headphone Output

1⁄4 inch (6.35mm) TRS Socket
Frequency Response

10Hz – 20kHz, +0.1/-0.5dB

Connectivity Remote Control

Infra Red (RC5)
Sample Rates Supported S/PDIF

32kHz - 192kHz (up to 24bit)

44.1kHz - 384kHz (16 to 24bit)
User Control Front Panel

Front panel buttons and touch-sensitive logo mute function
IR Input

Front panel

Remote handset
Operating System Windows

Windows 7 and 8 (up to 24bit/348kHz), Custom driver available

OSX 10.7 and above (up to 24bit/384kHz)
Power Supply Voltage

115V or 230V, 50 or 60Hz
Power Consumption

<17VA (max.)
Physical Dimensions (HxWxD)

87 x 207 x 314 mm

4.3 kg
Supplied with

Remote handset included, Power-Line Lite mains cable (UK denominations only)